Blandade bilder

 

 My VN 2000 Nomad projekt.
 

Since Ma Kaw won't do a VN2000 Nomad I intend to do it myself. 17 th. of July -06 I bought a new -05 VN2000, the bike was then Black.

Before the transformation

After the transformation

    

After this years riding season ( aprox. October ) I will take the fairing ( Premeux ), spotlights and hardbag toprails from my Nad and mount it on the V2K, I will remove the bullshead headlight since there is no room for it in the fairing and instead mount a normal headlight.
Right now I'm waiting for my Thunder 2 - 1 exhaust to arrive, this will give room for the hardbag on the right side, I will also install a Thunder airkit and PCIII.
 

This is what it looks like august -06

This is what the framework for trailer hitch, hardbags and trunk looks like

   

 

 
       
 
I had to remove a small portion of the hardbags to clear the hitch framework. Today 2006 09 30 I took the fairing of my 1500 Nomad and started to mount it on my V2K
 
Crashbars done and sent to chrome.  
Project almost done, just waiting for the Thunder 2-1 pipe,  Thunder airbox and the Isogrips.
       
       
       
 
Finaly done, the muffler, airbox and Isogrips arrived after 4 months of waiting.
     
Cruise control projekt

I will instal a Audiovox CCs-100 cruise control on my VN2000.

cruise1.jpg (125718 byte) cruise2.jpg (117736 byte) cruise3.jpg (114905 byte)  
Control panel housing made from solid aluminum, sealed with silicone.
cruise12.jpg (117019 byte) cruise4.jpg (117722 byte) cruise5.jpg (106231 byte) cruise7.jpg (111135 byte)

Vacuum servo in place

Vacuum servo from above

Material for vacuum canister

cruise8.jpg (106112 byte) cruise9.jpg (112893 byte) cruise10.jpg (119902 byte) cruise11.jpg (118028 byte)
Vacuum canister silver soldered together, ( 20cc volume ) mounted with hose clamps.
cruise13.jpg (145321 byte) cruise14.jpg (141839 byte) cruise15.jpg (140594 byte) cruise16.jpg (147907 byte)
Holder for the wire coming from the vacuum servo, the wire guide flange on the throttle body had to be extended to make sure that the wire could not hock up.
cruise17.jpg (123968 byte) cruise18.jpg (112103 byte) cruise19.jpg (147993 byte) cruise22.jpg (139505 byte)
Holder for the wire coming from the vacuum servo, the wire guide flange on the throttle body had to be extended to make sure that the wire could not hock up. Extension made of 1mm aluminum and epoxied in place.
       
cruise21.jpg (139419 byte) cruise20.jpg (138688 byte) cruise23.jpg (122470 byte)  
2 check valves is used, one vacuum line going to canister. Wire routing  
       
 
Misc. pics.
 
       
Blue oyster biker bar.pdf

PAV40 Tjekiskt släp från 1970. Ett litet vinter/vår projekt. De två första bilderna är på ett PAV40 släp i originalutförande. De övriga bilderna är på mitt släp och mitt nya sänkta chassi, aluminiumfälg med lågprofil.

Grundinställning.pdf 2004_VN2000_Parts.pdf 2004_VN2000_Service.pdf
Montering av sidostödsunderlägg.pdf Monteringsanvisning för getmageersättare CL och MS Monteringsanvisning för getmageersättare CT
  Mitt vinterprojekt